Custom Kitchen Cabinet, Built To Fit Your Kitchen
Measured at your home, drawn in 3D, then built and installed by our own workshop in Kota Damansara. Free 3D design and quote — no middleman.
or call us 017-929 6343
- Free 3D Design & Quote See your kitchen in 3D before you pay a cent. No obligation.
- We Visit or Video-Call Site measurement at your home, or a survey over video call.
- German Soft-Close Hardware Blum / Hettich grade runners and hinges on every door and drawer.
- One Workshop, No Middleman Straight from our own workshop in Kota Damansara — no agent markup.
Kitchen Cabinets Built To Your Kitchen — Not To A Standard Size
Every kitchen cabinet we build starts from the real measurements of your home. No off-the-shelf module forced into place, no dead gap at the end of a run, no filler panel hiding a mistake. We measure on site, draw the kitchen in 3D, then cut and assemble it ourselves at our workshop in Kota Damansara.
Because we handle the whole job — design, build and installation — you deal with the people actually making your cabinets, not an agent who subcontracts it to somebody else's factory. That is also why the pricing is more direct: there is no middleman markup sitting inside it.
Whether you need a full wet and dry kitchen or just a tall unit and an island, the process is the same: site measurement, 3D design, itemised quote, build, install. We work on homes right across the Klang Valley, and the free 3D design and quote comes before you commit to anything.
Minimalist, Handleless, Waterproof — The Kitchens People Ask Us For
Most of what makes a kitchen feel considered is decided here: what the carcass is built from, how the doors open, and how tightly the whole run lines up.
- Aluminium — 100% waterproof An aluminium carcass does not absorb water, swell or delaminate, and termites have nothing in it to eat. The usual choice for a wet kitchen or a sink run that takes a beating.
- Handleless fronts A routed J-profile pull or push-to-open hardware instead of a handle on the face. Nothing to catch a sleeve on, and the door line stays unbroken across the whole run.
- Minimalist flat-slab doors Full-height flat fronts with even, deliberate gaps — the look that reads calm rather than busy. Matte, gloss, woodgrain and fluted finishes are all quoted the same way.
- Moisture-resistant plywood Our standard carcass, not particle board. It survives Malaysian humidity and a leaking sink far better, which is the difference you notice in year three.
- Stone, sintered stone & solid surface tops Worktops, islands and splashbacks in marble, sintered stone or solid surface, with the sink cut-out and edge profile drawn before anything is cut.
- German soft-close hardware Blum / Hettich grade hinges and drawer runners on every door and drawer — quiet, and still square after years of use.
How Is A Custom Kitchen Cabinet Priced?
It is the first question everybody asks. We do not publish a fixed price here, because a custom kitchen cabinet is quoted per running foot against your actual kitchen rather than sold as a package. These are the four things that move the number:
- Cabinet length (running foot) Measured along the real length of your top, bottom and tall units — not by room size.
- Carcass & door material Moisture-resistant plywood, aluminium, melamine, 4G glass or acrylic — each sits at a different price.
- Hardware & accessories German soft-close hinges and runners, lift-ups, tandem drawers, corner units, pull-out baskets.
- Worktop & additional works Table top, splashback, island, sink cut-out and any electrical work the layout needs.
Priced straight from our own workshop in Kota Damansara — no agent, no middleman, no markup. Every quote is itemised so you can see what each part costs, instead of one round figure with everything buried inside it.
Kitchen Cabinets We Have Completed
From Measurement to Installation
Measure & Site Visit
We come and measure your kitchen, or run the first survey over a video call if that is easier.
3D Design & Quote
You get a 3D drawing and an itemised quotation — free, with no obligation to proceed.
We Build It
All cutting and assembly happens in our own workshop, not a subcontracted factory.
Install & Handover
A clean installation at your home, finished with the final adjustments and a walkthrough.
Kitchen Cabinet Installation Across The Klang Valley
Our workshop is in Kota Damansara, so most of the Klang Valley is a short drive for a site measurement. If you searched for a kitchen cabinet maker near you, these are the areas we cover:
- Petaling Jaya
- Subang Jaya
- Shah Alam
- Kota Damansara
- Bandar Utama
- Damansara Perdana
- Mutiara Damansara
- Ara Damansara
- Tropicana
- Mont Kiara
- Bukit Damansara
- Desa ParkCity
- TTDI
- Bangsar
- Bukit Bintang
- Bukit Jalil
- Cyberjaya
- Putrajaya
- Kota Kemuning
- Setia Alam
Not on the list? Send us your address on WhatsApp — if you are within reasonable reach of Kota Damansara we will still come out and measure. Site visits and the 3D design are free either way, and we can run the first survey over a video call if that suits you better.
Questions We Get Asked
How much does a custom kitchen cabinet cost?
Custom kitchen cabinets are quoted per running foot, so the price depends on the length of the cabinet run, the carcass and door materials, and the hardware you choose. That is why there is no single figure on this page — an accurate number only exists after a real measurement. Send us your floor plan or a few photos of the kitchen on WhatsApp and we will come back with an estimate, or we will come and measure and give you a fully itemised quote at no cost.
How much does an aluminium kitchen cabinet cost?
Aluminium is quoted per running foot like every other material, and it usually sits between a basic melamine build and a premium glass or acrylic finish. The final figure depends on the cabinet length, the door profile and the hardware. Send us your kitchen measurements or floor plan on WhatsApp and we will come back with a written, itemised quote — free, no obligation.
Do you make handleless and minimalist kitchen cabinets?
Yes. Handleless fronts are done either with a routed J-profile pull along the top edge of the door or with push-to-open hardware, and both work with flat-slab minimalist doors in matte, gloss, woodgrain or fluted finishes. Because the cabinets are built to your measurements, the door line runs unbroken across the whole kitchen instead of being interrupted where two standard modules meet.
Is an aluminium kitchen cabinet really waterproof?
The aluminium itself does not absorb water at all, so the carcass will not swell, warp or delaminate the way a board-based cabinet eventually can, and termites have nothing in it to feed on. That makes it the sensible choice for a wet kitchen or a sink run. Sealing around the sink and the worktop still has to be done properly — no material substitutes for a clean installation.
How long does it take from order to installation?
Usually three to six weeks from the day the design is confirmed and the deposit is paid, depending on the size of the project and the materials. The actual dates go into your quotation rather than being left as a vague estimate.
Which areas do you cover — is there a kitchen cabinet maker near me?
We cover the Klang Valley from our workshop in Kota Damansara, including Petaling Jaya, Subang Jaya, Shah Alam, Bandar Utama, Damansara Perdana, Mutiara Damansara, Ara Damansara, Tropicana, Mont Kiara, Bukit Damansara, Desa ParkCity, TTDI, Bangsar, Bukit Bintang, Bukit Jalil, Cyberjaya, Putrajaya, Kota Kemuning and Setia Alam. A site measurement anywhere in that range is free.
Is the 3D design and quotation really free?
Yes. We measure, draw the kitchen in 3D and give you an itemised quotation at no charge and with no obligation. You only pay a deposit once you are happy with both the design and the price.
Do you use solid plywood or particle board?
Our standard carcass is moisture-resistant plywood, not particle board — it survives Malaysian humidity and a leaking sink far better. Aluminium is available where you want a carcass that cannot absorb water at all. Door and finish options are quoted separately so you can see exactly what you are paying for.
Visit our workshop or book a call.
We're based in Kota Damansara and serve homes across the Klang Valley. Reach out — we usually reply within a few hours.
-
Workshop & OfficeNo. 22-1, Jalan Camar 4/2, Seksyen 4,
Kota Damansara, 47810 Petaling Jaya, Selangor -
Call / WhatsApp017-929 6343
-
HoursMon–Sat · 9:00am – 6:00pm